China Wholesale Pump Mechanical Seal For Sale Manufacturers - Components Material Series-FFKM – GuoWei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for Mechanical Shaft Seal, Alfa Laval Pump Seals, Water Pump, We've been honest and open up. We glance ahead on your pay a visit to and developing trustworthy and long-term standing relationship.
China Wholesale Pump Mechanical Seal For Sale Manufacturers - Components Material Series-FFKM – GuoWei Detail:

Dupont-Kalrez

Property

Unit

Kalrez 6375

Kalrez 4079

Tensile Strength @ Break

Mpa

15.1

16.9

kgf/cm Modulous @100%

154Mpa

172/7.2

7.3

kgf/cm2

73.4

74

/

Elongation percentage@ Break

%

160

150

Hardness

HS

75

75

Heat Resistance Temperature

X)

275

316

70 hr in room temperature

/

/

22

70 ht ar 2041:

/

30

25

China -FFKM

Property

unit

 

Hardness

HS

72

Tensile Strength @ Break

Mpa

20

Enlogation Percentage @ Break

%

175

Modulous @100%

Mpa

10.5

Heat Resistance Temperature

P

270P

70 hr in room temperature

/

19

70 hr at 204 °C

/

49

Installlation nstructions

Preservation:
1 Shaft outside diameter is within tolérance 0 comm
2.Shaft run out<0.1mm
3.Shat end float<0.13mm
4 No sharp edges on the shaft over the o ring
Note:
During the installation don’t scratch or damage the o ring . if anything is damaged , please contact with our local agents to replace a new one.

Installation in structions:
The full set of cartridge seal is cleaned and exactly passed leakage examine before sale.In order to avoid damage, don’t disassemble and clean the parts again before fixing.
2 The fitting allowance between the seal and shaft is dl h6 0.8, and there should be leading-inedge at the end of shaft. The outside diameter of shaft at the position of screw should be 01 -0.2mm smaller, resisting the screw over-tighten Lubricate the shaft with oil.
3. Place the cartridge seal into the pump chamber, then:
    A: Tighter four screw bolts of flanges, ensuring the medium leading in hole”Gat the top Position.
    B: Tighter four set screws and position the shaft sleeve on the shaft.
    C: Remove four gauge plates. Please keep them and they will be used in future installation and dissassembl.
    D Connect the medium lead-in pipe with hole”Gin order to flush away the friction heat and flushing the seal chamber when pump running.

Note:
After complete the installation, turning the shaft by hand to check for the rotation. If the shaft could not rotate smoothly, seal had been improperly installed.


Product detail pictures:


Related Product Guide:
Lip Seals Market to Exhibit Impressive Growth During 2018-2028 | Lowara Vertical Multistage Centrifugal Pump
Datwyler-expands-sealing-reach-with-two-deals web web | Travel Motor Seal Kit

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for China Wholesale Pump Mechanical Seal For Sale Manufacturers - Components Material Series-FFKM – GuoWei , The product will supply to all over the world, such as: Colombia, Leicester, Manchester, we are sincerely hope to establish one good long term business relationship with your esteemed company thought this opportunity, based on equal, mutual beneficial and win win business from now till the future.

This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
5 Stars By mary rash from Croatia - 2017.11.12 12:31
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
5 Stars By Daisy from Tunisia - 2018.09.29 17:23
Write your message here and send it to us