Hot Selling for Silicone Oil Seals - Components Material Series-FFKM – GuoWei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for Stationary Ring, Flygt Pump Seals, HAIGH Pump Seals, All the time, we have been paying attention on all details to insure each product satisfied by our customers.
Hot Selling for Silicone Oil Seals - Components Material Series-FFKM – GuoWei Detail:

Dupont-Kalrez

Property

Unit

Kalrez 6375

Kalrez 4079

Tensile Strength @ Break

Mpa

15.1

16.9

kgf/cm Modulous @100%

154Mpa

172/7.2

7.3

kgf/cm2

73.4

74

/

Elongation percentage@ Break

%

160

150

Hardness

HS

75

75

Heat Resistance Temperature

X)

275

316

70 hr in room temperature

/

/

22

70 ht ar 2041:

/

30

25

China -FFKM

Property

unit

 

Hardness

HS

72

Tensile Strength @ Break

Mpa

20

Enlogation Percentage @ Break

%

175

Modulous @100%

Mpa

10.5

Heat Resistance Temperature

P

270P

70 hr in room temperature

/

19

70 hr at 204 °C

/

49

Installlation nstructions

Preservation:
1 Shaft outside diameter is within tolérance 0 comm
2.Shaft run out<0.1mm
3.Shat end float<0.13mm
4 No sharp edges on the shaft over the o ring
Note:
During the installation don’t scratch or damage the o ring . if anything is damaged , please contact with our local agents to replace a new one.

Installation in structions:
The full set of cartridge seal is cleaned and exactly passed leakage examine before sale.In order to avoid damage, don’t disassemble and clean the parts again before fixing.
2 The fitting allowance between the seal and shaft is dl h6 0.8, and there should be leading-inedge at the end of shaft. The outside diameter of shaft at the position of screw should be 01 -0.2mm smaller, resisting the screw over-tighten Lubricate the shaft with oil.
3. Place the cartridge seal into the pump chamber, then:
    A: Tighter four screw bolts of flanges, ensuring the medium leading in hole”Gat the top Position.
    B: Tighter four set screws and position the shaft sleeve on the shaft.
    C: Remove four gauge plates. Please keep them and they will be used in future installation and dissassembl.
    D Connect the medium lead-in pipe with hole”Gin order to flush away the friction heat and flushing the seal chamber when pump running.

Note:
After complete the installation, turning the shaft by hand to check for the rotation. If the shaft could not rotate smoothly, seal had been improperly installed.


Product detail pictures:


Related Product Guide:
Datwyler-expands-sealing-reach-with-two-deals web web | Water Pump O-Ring
Global Automotive Rubber Oil Seal Market Development, Top Trends and Future Scope with Upcoming Opportunities | Water Pump O-Ring

We consistently execute our spirit of ''Innovation bringing progress, Highly-quality ensuring subsistence, Administration advertising and marketing gain, Credit history attracting buyers for Hot Selling for Silicone Oil Seals - Components Material Series-FFKM – GuoWei , The product will supply to all over the world, such as: Senegal, Washington, Benin, With excellent products, high quality service and sincere attitude of service, we ensure customer satisfaction and help customers create value for mutual benefit and create a win-win situation. Welcome customers all over the world to contact us or visit our company. We will satisfy you with our professional service!

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
5 Stars By Myrna from Mexico - 2017.09.16 13:44
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
5 Stars By Karen from Germany - 2017.09.28 18:29
Write your message here and send it to us